Job Details

Job Duties and Qualifications

• Under direct supervision, performs Job Safety Analysis (JSA) and safety meetings, and the rigging up and down of Coil Tubing service line equipment.
• Assembles and prepares equipment for installation and service.
• Assists in the running of a job. Maintains general housekeeping, clean up, repair, and preparation of equipment for the next job.
• Performs pre/post job Coiled Tubing equipment inspections.
• Responsible for safe crane and rigging operations during the delivery of services in accordance with Customer's design and KPI's.
• Operates High Pressure fluid pump and coil tubing support equipment (flow back package).
• Performs hydrostatic testing on Blow Out Prevention (BOP) and reels during pre/post job procedures including Preventative Maintenance (PM's).
• Mentors peers and trains Operator Assistants.
• Monitors well control parameters and calculations before and during job applications.
• Performs and complete preventative maintenance on all Coil Tubing associated equipment.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.
• Drives a truck or other assigned equipment as required.
• Skills typically acquired through completion of high school diploma or similar education and typically 6 months experience as Operator Assistant ll.
• May require a valid Commercial Driver's License.
• Product Service Line (PSL) specific equipment/job skills required.
• Must have completed essential math, red book and Coil Tubing I training.
• Given the nature of oil field service work, must possess good interpersonal skills and the ability to communicate effectively with others is necessary.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.
• Skills are typically acquired through 6 months of experience as an Operator Asst-Coil Tubing, II.
• The ability to perform basic mathematical calculations is required.
• Basic reading comprehension and writing skills are required.
• Basic computer skills are preferred. Licensure to drive commercial vehicles may be required.
• Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
• Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
• Promotes and takes an active part in the Quality Improvement Process.

Job Duties and Qualifications

• Under direct supervision, performs Job Safety Analysis (JSA) and safety meetings, and the rigging up and down of Coil Tubing service line equipment.
• Assembles and prepares equipment for installation and service.
• Assists in the running of a job. Maintains general housekeeping, clean up, repair, and preparation of equipment for the next job.
• Performs pre/post job Coiled Tubing equipment inspections.
• Responsible for safe crane and rigging operations during the delivery of services in accordance with Customer's design and KPI's.
• Operates High Pressure fluid pump and coil tubing support equipment (flow back package).
• Performs hydrostatic testing on Blow Out Prevention (BOP) and reels during pre/post job procedures including Preventative Maintenance (PM's).
• Mentors peers and trains Operator Assistants.
• Monitors well control parameters and calculations before and during job applications.
• Performs and complete preventative maintenance on all Coil Tubing associated equipment.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.
• Drives a truck or other assigned equipment as required.
• Skills typically acquired through completion of high school diploma or similar education and typically 6 months experience as Operator Assistant ll.
• May require a valid Commercial Driver's License.
• Product Service Line (PSL) specific equipment/job skills required.
• Must have completed essential math, red book and Coil Tubing I training.
• Given the nature of oil field service work, must possess good interpersonal skills and the ability to communicate effectively with others is necessary.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.
• Skills are typically acquired through 6 months of experience as an Operator Asst-Coil Tubing, II.
• The ability to perform basic mathematical calculations is required.
• Basic reading comprehension and writing skills are required.
• Basic computer skills are preferred. Licensure to drive commercial vehicles may be required.
• Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
• Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
• Promotes and takes an active part in the Quality Improvement Process.

Job Duties and Qualifications

• Under direct supervision, performs Job Safety Analysis (JSA) and safety meetings, and the rigging up and down of Coil Tubing service line equipment.
• Assembles and prepares equipment for installation and service.
• Assists in the running of a job. Maintains general housekeeping, clean up, repair, and preparation of equipment for the next job.
• Performs pre/post job Coiled Tubing equipment inspections.
• Responsible for safe crane and rigging operations during the delivery of services in accordance with Customer's design and KPI's.
• Operates High Pressure fluid pump and coil tubing support equipment (flow back package).
• Performs hydrostatic testing on Blow Out Prevention (BOP) and reels during pre/post job procedures including Preventative Maintenance (PM's).
• Mentors peers and trains Operator Assistants.
• Monitors well control parameters and calculations before and during job applications.
• Performs and complete preventative maintenance on all Coil Tubing associated equipment.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.
• Drives a truck or other assigned equipment as required.
• Skills typically acquired through completion of high school diploma or similar education and typically 6 months experience as Operator Assistant ll.
• May require a valid Commercial Driver's License.
• Product Service Line (PSL) specific equipment/job skills required.
• Must have completed essential math, red book and Coil Tubing I training.
• Given the nature of oil field service work, must possess good interpersonal skills and the ability to communicate effectively with others is necessary.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.
• Skills are typically acquired through 6 months of experience as an Operator Asst-Coil Tubing, II.
• The ability to perform basic mathematical calculations is required.
• Basic reading comprehension and writing skills are required.
• Basic computer skills are preferred. Licensure to drive commercial vehicles may be required.
• Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
• Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
• Promotes and takes an active part in the Quality Improvement Process.

Job Duties and Qualifications

• Under direct supervision, performs Job Safety Analysis (JSA) and safety meetings, and the rigging up and down of Coil Tubing service line equipment.
• Assembles and prepares equipment for installation and service.
• Assists in the running of a job. Maintains general housekeeping, clean up, repair, and preparation of equipment for the next job.
• Performs pre/post job Coiled Tubing equipment inspections.
• Responsible for safe crane and rigging operations during the delivery of services in accordance with Customer's design and KPI's.
• Operates High Pressure fluid pump and coil tubing support equipment (flow back package).
• Performs hydrostatic testing on Blow Out Prevention (BOP) and reels during pre/post job procedures including Preventative Maintenance (PM's).
• Mentors peers and trains Operator Assistants.
• Monitors well control parameters and calculations before and during job applications.
• Performs and complete preventative maintenance on all Coil Tubing associated equipment.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.
• Drives a truck or other assigned equipment as required.
• Skills typically acquired through completion of high school diploma or similar education and typically 6 months experience as Operator Assistant ll.
• May require a valid Commercial Driver's License.
• Product Service Line (PSL) specific equipment/job skills required.
• Must have completed essential math, red book and Coil Tubing I training.
• Given the nature of oil field service work, must possess good interpersonal skills and the ability to communicate effectively with others is necessary.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.
• Skills are typically acquired through 6 months of experience as an Operator Asst-Coil Tubing, II.
• The ability to perform basic mathematical calculations is required.
• Basic reading comprehension and writing skills are required.
• Basic computer skills are preferred. Licensure to drive commercial vehicles may be required.
• Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
• Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
• Promotes and takes an active part in the Quality Improvement Process.