Job Details

Job Duties

• Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment.
• Learns basic oil well operations including but not limited to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse.
• Assists in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools.
• Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports.
• Understands hazardous materials, job, wash up and discharge procedures.
• Verifies correct line up of valves on bulk systems and surface manifold equipment.
• Job tasks, correctly performed, have minimal impact upon the viability of the organization.
• Error is readily ascertainable by the supervisor and can be corrected.
• Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
• Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes.

Qualifications

• Skills are typically acquired through successful completion of high school or similar education and 0-6 months of experience as an Operator Asst-Cementing I.
• Licensure to drive commercial equipment is required.
• May require I-Learn courses: Cementing II and Service Tools I.
• Given the nature of oil field service work, the ability to communicate effectively with others is necessary.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Service Operator I or Service Operator II.

World Class Benefits: 

• Medical, dental, vision, coverage in addition to life and disability insurance plans
• Paid Vacation Days, Paid Holidays and the ability to purchase additional days off  
• Retirement and Savings (401K) Plan with a matching contribution  
• Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more. 
• Employee Job Referral Bonus Program 
• Employee Stock Purchase Program 
• Educational Assistance

Job Duties

• Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment.
• Learns basic oil well operations including but not limited to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse.
• Assists in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools.
• Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports.
• Understands hazardous materials, job, wash up and discharge procedures.
• Verifies correct line up of valves on bulk systems and surface manifold equipment.
• Job tasks, correctly performed, have minimal impact upon the viability of the organization.
• Error is readily ascertainable by the supervisor and can be corrected.
• Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
• Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes.

Qualifications

• Skills are typically acquired through successful completion of high school or similar education and 0-6 months of experience as an Operator Asst-Cementing I.
• Licensure to drive commercial equipment is required.
• May require I-Learn courses: Cementing II and Service Tools I.
• Given the nature of oil field service work, the ability to communicate effectively with others is necessary.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Service Operator I or Service Operator II.

World Class Benefits: 

• Medical, dental, vision, coverage in addition to life and disability insurance plans
• Paid Vacation Days, Paid Holidays and the ability to purchase additional days off  
• Retirement and Savings (401K) Plan with a matching contribution  
• Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more. 
• Employee Job Referral Bonus Program 
• Employee Stock Purchase Program 
• Educational Assistance

Job Duties

Under direct supervision of Operations leadership, the Coordinator is responsible for the implementation of health, safety and environmental policies, procedures and guidelines as instructed. Duties are likely to be within a defined project, work site or geographic location. Activities include, but are not limited to, hazard identification and risk management, incident reporting, investigation and causal analysis, waste minimization, pollution prevention and control, emergency response, and various compliance activities in all areas of HSE. Provides oversight of the integrated management system (HMS) that at a minimum meets the needs of the company and the requirements of industry standards. Conducts and participates in internal, regulatory, and customer audits and inspections. Record-keeping and other general administrative duties are likely. Provides technical advice, data interpretation, training, and process improvement. Requires an Undergraduate Degree in an HSE related field, Science, or Engineering and three years of experience in Oil & Gas, or Manufacturing.

Job Description:

1. Person must have minimum 5 years of experience in implementation of HSE strategies, policies, procedures, and processes in Upstream Oil & Gas Drilling & Completion Operation in onshore and offshore.
2. Person must be fluent in Hindi and English communication. (Read, Write and Speak)
3. Person must be aware about statutory requirements applicable in upstream oil & gas drilling operation in India e.g. OMR, OISD, PESO, PCB etc.
4. Develop and implement, project specific HSE bridging document, ERP, annual HSE plan.
5. Run campaign, conduct drills, inspections, and audit as per project annual HSE plan. 
6. Prepare weekly and monthly HSE Reports. 
7. Conduct project specific weekly safety meeting and participate in customer’s monthly safety meeting.
8. Person must participate in Hazard Identification and Risk Management to ensure effective controls are identified and in place.
9.STOP any unsafe work and develop culture among crew for same.
10.Co-ordinate HSE related matter with customer and contractor.
11.Carry out incident investigation, root cause analysis and identification and implementation of Corrective and Preventive Actions (CAPA).
12.Person must be well versed with Microsoft Office Package i.e. Word, Excel and Power Point.

Location: Navi Mumbai/ Kakinada – Ready to re-locate Barmer and other locations based on project requirement within India/ outside India.

Qualifications

Minimum qualification:

 M. Tech in HSE/ Industrial Safety or
 B. Tech in Fire & Safety/ Industrial Safety or
 Engineering/ Science Graduate + Diploma in Industrial Safety

Job Duties

Under direct supervision of Operations leadership, the Coordinator is responsible for the implementation of health, safety and environmental policies, procedures and guidelines as instructed. Duties are likely to be within a defined project, work site or geographic location. Activities include, but are not limited to, hazard identification and risk management, incident reporting, investigation and causal analysis, waste minimization, pollution prevention and control, emergency response, and various compliance activities in all areas of HSE. Provides oversight of the integrated management system (HMS) that at a minimum meets the needs of the company and the requirements of industry standards. Conducts and participates in internal, regulatory, and customer audits and inspections. Record-keeping and other general administrative duties are likely. Provides technical advice, data interpretation, training, and process improvement. Requires an Undergraduate Degree in an HSE related field, Science, or Engineering and three years of experience in Oil & Gas, or Manufacturing.

Job Description:

1. Person must have minimum 5 years of experience in implementation of HSE strategies, policies, procedures, and processes in Upstream Oil & Gas Drilling & Completion Operation in onshore and offshore.
2. Person must be fluent in Hindi and English communication. (Read, Write and Speak)
3. Person must be aware about statutory requirements applicable in upstream oil & gas drilling operation in India e.g. OMR, OISD, PESO, PCB etc.
4. Develop and implement, project specific HSE bridging document, ERP, annual HSE plan.
5. Run campaign, conduct drills, inspections, and audit as per project annual HSE plan. 
6. Prepare weekly and monthly HSE Reports. 
7. Conduct project specific weekly safety meeting and participate in customer’s monthly safety meeting.
8. Person must participate in Hazard Identification and Risk Management to ensure effective controls are identified and in place.
9.STOP any unsafe work and develop culture among crew for same.
10.Co-ordinate HSE related matter with customer and contractor.
11.Carry out incident investigation, root cause analysis and identification and implementation of Corrective and Preventive Actions (CAPA).
12.Person must be well versed with Microsoft Office Package i.e. Word, Excel and Power Point.

Location: Navi Mumbai/ Kakinada – Ready to re-locate Barmer and other locations based on project requirement within India/ outside India.

Qualifications

Minimum qualification:

 M. Tech in HSE/ Industrial Safety or
 B. Tech in Fire & Safety/ Industrial Safety or
 Engineering/ Science Graduate + Diploma in Industrial Safety